Type 1 Pump 12V - For Use w/Steering Systems Equipped w/4.914 Cubic"

Type 1 pump 12 volt. Reversing hydraulic pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering rams. The type 1 hydraulic drive is compatible with both s1/s1g and s2/s2g core packs. Use the table below to determine the type 1 hydraulic drive's capacity when used with each core pack. Core pack used s1 or s1 gram. Ram capacity 4.9 in - 10.5 in. (80cc-172cc). Maximum stall. Pressure at 12 volts 750 psi (50 bar). (no load) 67in/min (1000cc/min). Core pack used s2 or s2 gram capacity. Ram capacity 4.9in - 14in. (80cc - 230cc) maximum stall. Pressure at 12 volts 750 psi (50 bar). Peak flow rate. (no load) 67in/min (1000cc/min). Manufacturer: raymarine. Pilot type = none. Drive type = none. Vessel displacement - max (pounds) = none. Boat length - max (feet) = none. Capacity - max ram (cu) = none. Remote capable = none. Feedback type = none. Turn patterns = none.